16
Oven Statistics Screen
• Operation is logged by days, hours and minutes for
magnetron, heaters, blower and overall on time.
• Door cycles and cook cycles are also counted.
• These numbers can be reset by pressing the reset
button. A prompt will appear asking for confirmation
before resetting.
• Selecting the Date, or Time field brings up a numeric
keypad. The date and time is used in the Oven
Statistics function and in the Home On Screen.
Oven Programming
System Setup
Controller Setting Screen
Menu File Management Screen
• Selecting Speaker or - will change the
volume only after saving the settings and leaving the
screen.
• Selecting Display Brig or - will change the
intensity of the display.
• Selecting Temperature Scale will toggle between
Celsius and Fahrenheit.
• Selecting Enable/Disable Recipe Edit will toggle
between allowing changes to be made in the Menu
Setup Tab.
• Selecting Manager PIN Maintenance will allow the
manager PIN to be changed to any 4 digit number.
• Menu files are transported through the use of a USB
storage drive. The USB terminal is located at the
bottom right corner under the front panel.
• Insert the USB storage drive into the oven.
• Select “Load Menu” to import the menu files into the
oven from the USB storage drive.
• Select “Save Menu” to export the menu from the oven
into the USB storage drive.
• NOTE: All files are over written during any transaction.
Multiple files can not be stored in either the oven or in
the same folder directory on the USB storage drive.
• A status indicator bar will display the transaction
progress. A dialog box will announce the completion of
the file transfer.
• Press the Back button to return to the Manager
Settings Screen.
Fault Screen
• The Fault Screen will appear if one of the three
possible fault codes occur.
• Oven Over Temperature, Magnetron Over
Temperature, and Open Thermocouple are the three
faults that will shut down a cook cycle and display the
Fault Screen.
• In the event of a fault screen, cycle power to the unit.
If problem persists, call for service.
Menu File Management
Load
Menu
Save
Menu
Back
Oven Statistics
Back
Reset
Door Cycles: XXXXX
Cook Cycles: XXXXX
Oven On Time: XXXXD XXH XXM
Mag 1 On Time: XXXXD XXH XXM
Mag 2 On Time: XXXXD XXH XXM
Heater 1 On Time: XXXXD XXH XXM
Heater 2 On Time: XXXXD XXH XXM
Blower On Time: XXXXD XXH XXM
Controller Settings
Back
Save
Date:
XXM / XXD / XXXXY
Time:
00H:00M AM
Speaker Volume:
80%
+
–
Display Brightness:
90%
+
–
Speaker Volume:
F
Enable/Disable Recipe Edit:
Enable
Manager PIN Manintenance:
1234
Oven Over Temperature Fault
Alert!
Alert!
Alert!
Alert!
Please Remove Power and Call
Service Immediately
800-733-2203
