Page 6 of 61
TRANSPORT AND STORAGE
When not in use, the InvivO
2
Workstation must only be stored within a temperature of
between 0°C and 30°C
Storage outside of this range may damage the workstation.
LOCATION AND HANDLING OF THE INVIVO2 WORKSTATION
The InvivO
2
Workstation should only be installed or relocated by a qualified engineer. To
arrange installation or relocation please contact your local distributor.
The mains appliance coupler and plug are the AC mains supply isolation device and must
be easily accessible.
ENVIRONMENTAL OPERATING CONDITIONS
The InvivO
2
Workstation should only be operated under the following environmental
conditions:
Temperature – Between 15
⁰
C and 30
⁰
C
Humidity – Between ambient and 90% RH, Non-Condensing
The workstation must be located in a well-ventilated area.
