PAGE
5
Solvent Storage Base Cabinet
•
Exhaust Plenum
•
Double wall construction creates a minimum 1½" air gap throughout the cabinet.
•
Interior back and side panels are 18-gauge stainless steel monolithic construction welded to top and bottom
panels to form a unitized inner cabinet.
•
The 18-gauge stainless steel bottom pan is recessed 2" and welded liquid tight.
•
2" diameter plugged penetrations in back wall, and two front removable rear panels provide access to the 10"deep
chase at the rear to allow for installation of the (optional) vent package.
•
Access panels are located at each end of the chase.
•
An optional vent package offers from 10 to 15 air changes per hour, depending on cabinet size; the vent assembly
with flexible hose is designed to “T” into the fume hood
•
A reinforced Type 304 stainless steel shelf is adjustable on 1” centers.
•
Dual panel doors, 1½" thick, with 3" wide continuous hinge, and secured with a 3-point latch; optional louver doors
are available.
•
2½" riser with 3⁄8" leveling feet.
•
16-gauge, cold-rolled steel side
Summary of Contents for ChemGARD FH4
Page 1: ...Underwriter Laboratories Listed C h e m G A R D ...
Page 9: ......
