Bugbox
UM-16 R5.0
Page 23 of 48
Bugbox User Manual
Hand access to the main chamber
Direct hand access to the workstation chamber is provided via the glove ports and the Ezee Sleeve
system. The Ezee Sleeves provide direct bare hand (or gloved) access to the workstation chamber.
The glove ports and Ezee Sleeves can be used in 3 ways;
Left hand glove port only, for loading items into the workstation chamber via the Single Plate
Entry System (SPES), if fitted.
Both glove ports, for working inside the workstation chamber, loading items into the
workstation chamber via the SPES and unloading the interlock.
Right hand glove port only, for unloading the interlock.
For each method of entry, the glove port selector knob (Figure 11) must be set in the correct position.
Figure 14 shows the positioning of the glove port selector knob for each mode of operation;
Figure 14: Glove port selector knob positioning
