Bugbox
UM-16 R5.0
Page 16 of 48
Bugbox User Manual
Control system layout
Please familiarise yourself with the control system layout of your Bugbox workstation.
Control panel
Figure 9 shows the control panel of the Bugbox workstation;
Figure 9: Bugbox workstation control panel
1.
Power indicator. Illuminates to indicate the workstation is connected to the mains and is
switched on.
2.
Chamber light switch. Press to switch the chamber light on/ off.
3.
Gas Alarm switch. Press to switch the gas alarm on/ off.
4.
Humidistat. Controls the level of humidity inside the workstation chamber.
5.
Interlock purge button. Press to initiate the interlock purge cycle.
6.
Lock active indicator LED. Flashes to indicate that the interlock purge cycle is in progress.
7.
Gas demand indicator. Illuminates when there is a low pressure condition inside the
workstation chamber.
8.
ANO
2
low indicator. Illuminates to indicate that the anaerobic mixed gas supply has run out.
9.
N
2
low indicator. Illuminates to indicate that the nitrogen supply has run out.
10.
Temperature controller. See section 3.3.2 for more details.
1
2
3
4
10
9
8
7
6
5
