6
5.0 Charging the PT900 transmitter
and tablet
Before proceeding, make sure that both the PT900 Transmitter and the
Tablet are fully charged. The AC power adapter is shipped in the carry case.
If either the transmitter or the tablet cannot be powered On after charging,
contact your Panametrics representative for assistance.
To charge the transmitter, use the AC power adapter provided. Charging
will occur whether the PT900 is On or Off, and the battery LEDs indicate
the battery charging status. Charging a fully-depleted battery pack to full
charge may take up to 3 hours.
6.0 Installing the PT900 tablet app
This section describes how to install the PT900 APP on your Android tablet.
6.1 Obtaining the PT900 android app
Obtain the PT900 APP from one of the following locations:
• Google Play Store (free download):
Set up a free account in Google Play Store. Search for the TransPort
PT900 APP and install it on your tablet.
• QR Code or Panametrics Website (free download):
Either Scan the QR Code in Figure 2 below or download the latest
version of the APP directly from the Panametrics website at the
following URL:
https://www.bakerhughesds.com/panametrics/
Figure 2: QR Code
• The SD card supplied with your PT900 system:
Plug the SD card directly into your tablet, and select the APK file
from the SD folder.
Note:
Check the Panametrics website for the latest version.
