Baker Hughes Panametrics Sentinel LCT8, User Manual, Page: 73 / 138

3.6.4 Setting up an analog input (optional)
If an option card with an analog input is installed, to set up the analog input, refer to Figure 66 on page 63 below and
complete the steps on the following page.
NOTE: If necessary, refer to Table 4 on page 23 as a reminder about color code meanings.
Figure 66: Setting up an analog input
Legend
Green At least user 3 level access required to follow the step.
Dotted
green
Not all transitional screens are shown (at least user 3 level
access required).
Green Option only visible to user 3 or above.
63