Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 34 / 138

3.3 Measurement view, security and page overview
The initial screen displayed upon meter startup is known
as measurement view . The elements of measurement view
are shown in Figure 38 below, with gray arrows pointing to
each element.
NOTE: If necessary, refer to Table 4 on page 23 as a
reminder about color code meanings.
Note the following:
• When logged in to
display locked access level, the
user can choose the measurement to be displayed in
measurement view from a list of options.
• If there are no errors on the channel chosen for
measurement view , the error indicator at the bottom right
of the display is blank.
3.2.2 Security access level and privileges
To prevent unauthorized tampering with either the display or the user program, the Sentinel LCT8 has multiple security
access codes which grant different access level privileges (see Table 5 below).
Table 5: Security level descriptions
Level Security access Default passcode Privilege details
0 Full lock 0000 (fixed) Meter locked, need passcode to unlock for viewing data or configuration.
1 Display locked 2719 (fixed) Viewing data, select parameters to show in the measurement view.
2 User 1 0001*
Basic user configuration privileges
3 User 2 0002*
4 User 3 0003*
Basic + power user configuration privileges
5 User 4 0004*
6 User admin 0005* Basic + power + admin user configuration privileges
*Panametrics recommends user admin to set new passcodes for each user access level.
Measurement value
Error indicator
(specific to the channel
in measurement view)
Software version number
Current security access
level indicator
Unit of the
measurement value
Channel indicator
for the displayed
measurement value
Name of the displayed
measurement value
Figure 38: Measurement view
24 24