background image

iv  |  

Baker Hughes

© 2020 Baker Hughes Company. All rights reserved.

Safety Precautions

IMPORTANT - Please read before installation

Masoneilan 5A Series Double-Acting Actuator instructions contain 

DANGER

WARNING

, and 

CAUTION

 labels, where 

necessary, to alert you to safety related or other important information.
Read the instructions carefully before installing and maintaining your control valve. 

DANGER

 and 

WARNING

 hazards are 

related to personal injury. 

CAUTION

 hazards involve equipment or property damage. Operation of damaged equipment can, 

under certain operational conditions, result in degraded process system performance that can lead to injury or death. Total 

compliance with all 

DANGER

WARNING

, and 

CAUTION

 notices is required for safe operation

CAUTION

DANGER

WARNING

 

This is the safety alert symbol. It alerts you to potential personal injury hazards. Obey all safety messages that follow this 

symbol to avoid possible injury or death.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.

When used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, could result in 

property damage.

Note: Indicates important facts and conditions.

WARNING

CAUTION

Summary of Contents for Masoneilan 5A Series













Reviews: