Baker Hughes Druck PV411, Instruction Manual

Page: 10 / 11

Copyright 2000 Baker Hughes Company.
English–PV 411A Instruction Manual | 5
5. General Specification
6. Returned Goods Procedure
If the unit requires calibration or is unserviceable, return it
to the nearest Druck Service Centre listed at: Druck.com
Contact the Service Department to obtain a Return
Authorization (Worldwide excluding USA).
In the USA, obtain a Return Material Authorization [RMA].
Provide the following information on either a RGA or RMA:
•
Product (i.e. PV 411A)
• Pressure medium (i.e. pneumatic, hydraulic)
• Serial number
• Details of defect/work to be undertaken
• Operating conditions
6.1 Safety Precautions
You must inform Druck if the product has been in contact
with any hazardous or toxic substance.
The relevant COSHH or in the USA, MSDS, references and
precautions to be taken when handling.
6.2 Approved Service Agents
For the list of service centers:
Druck.com
INFORMATION
Hydraulic fluids must be
compatible with stainless steel, anodized
aluminum, nitrile rubber, PTFE,
polypropylene, Delrin, acrylic and nylon.
Item Specification
Pneumatic Pressure
Range
0 to 60 bar (0 to 600 psi)
Vacuum Pressure Range 0 to -0.95 bar
a
(0 to 28.5 inHg)
a
a. This value assumes atmospheric pressure at 1 bar (14.5 psi) and
varies depending on atmospheric pressure.
Hydraulic Pressure Range 0 to 700 bar (0 to 10,000 psi)
Maximum Safe Working
Pressure
700 bar (10,000 psi)
Pressure Connections ¼” BSP parallel female (¼” NPT
female in USA)
Maximum Hydraulic Fluid
Viscosity
150 cSt at 40°C (104°F)
Recommended Hydraulic
Fluids
De-mineralized water or mineral-
based oils (SAE 40W, ISO viscosity
grade 150)
Dimensions (Length x
Width x Depth)
260 mm (10.2”) x 150 mm (5.3”) x 100
mm (3.7”)
Weight (approximate) 1.2 kg (2.5 lb)
INFORMATION
Service by unauthorized
sources will affect the warranty and may not
guarantee further performance.