Consolidated 2900 Series Generation II POSRV Instruction Manual
| 39
© 2021 Baker Hughes Company. All rights reserved.
C. Cleaning
1. Clean parts to remove all rust, burrs, scale,
organic matter, and loose particles. Parts are to
be free of any oil or grease except for lubrication
as specified in this instruction.
2. Cleaning agents used shall be such that effective
cleaning is assured without injuring the surface
finishes or material properties of the part.
3. Acceptable cleaning agents include
demineralized water, nonphosphate detergent,
acetone, and isopropyl alcohol. Parts must be
blown dry or wiped dry after cleaning.
4. If you are using cleaning solvents, take
precautions to protect yourself from potential
danger from breathing fumes, chemical burns, or
explosion. See the solvent’s Material Safety Data
Sheet for safe handling recommendations and
equipment.
5. Do not “sand blast” internal parts as it can
reduce the dimensions of the parts.
Follow
recommendations
for safe handling in
the solvent's Material
Safety Data Sheet
and observe safe
practices for any
cleaning method
