Device Application Notes For NetVault
Revision A7
BakBone Software, Inc.
2
11/3/2003
Attention
:
Device Template Installation available through the use of standard
package installation procedures. Refer to the following for details.
Installation:
¾
Prerequisites
9
Ensure Termination is configured correctly by using the Manufacturer User’s Guide for
reference.
9
Attach Device to system by using the Manufacturer’s Installation Guide for reference.
9
Power On Unit, if required and allow for the completion of the device’s POST (Power-On Self-
Test).
9
Ensure the Certance CLL3200 LTO-2 Loader is set to its default settings. For further details
refer to the Installation and Operation Manual for the Certance CLL3200 LTO-2 Loader.
9
Configure SCSI IDs via front panel. This autoloader is a two SCSI ID device, one for the
Certance LTO drive (Default ID=6) and one for the robotic arm changer (Default ID=5). For
further details refer to the Installation and Operation Manual for the Certance CLL3200 LTO-2
Loader.
9
Power on Computer System.
