Bajaj DOMINAR 400 BS VI, Owner'S Manual

Page: 11 / 60

PRIMARY SPEEDOMETER DETAILS
SPEEDOMETER DISPLAY WILL WORK WHEN IGNITION SWITCH IS IN 'ON' POSITION.
1. Tachometer Dial : It shows engine speed in RPM.
2. ABS Indicator (Yellow) (( ) ): With Ignition switch ON the
ABS indicator glows. When vehicle speed is more than 5
Km/hr, the ABS indicator goes OFF, if this indicator glows
while vehicle is running, it means there is problem in ABS.
3. Hi Beam Indicator : When Headlight is 'ON' &Hi beam or 'PASS'
is selected then Hi beam indicator will glow.
4. Neutral Indicator : When the transmission is in Neutral,
Neutral indicator will glow - 'N' in primary speedometer & 0
will be displayed in secondary speedometer.
5. Malfunction Indicator ( ):It glows whenever any abnormality
is noticed in functioning of Fl system components.
6. Turn Signal Indicator (LH & RH) : When Turn signal switch is
pushed to Left or Right. Turn Signal Indicator - LH or RH will
ash.
7. Generic Alarm Indicator ( ): It remains continuously ON if
alarm message = 1, it blinks if alarm messages are
more than 1.
8.
Engine RPM Limit Indicator : It reminds rider to drive in safe
engine RPM.
Within initial 2000Kms running (RUNNING IN period)
• RPM limit indicator blinks @ 6700 to 7000 RPM
• RPM limit indicator continuously glows if RPM is>7000 km.
Beyond 2000 kms running –
• RPM limit indicator blinks @ 9200 to 9500 RPM
• RPM limit indicator continuously glows if RPM is > 9500 km
9.
Bajaj Logo : Bajaj logo ying 'B' glows with ignition 'ON'
10. Fuel Level Indicator : It shows approximate fuel level in
fuel tank.
11.
Low Fuel Level Indicator :
Fuel bar = 1 - Bar 1 glows steady & low fuel symbol blinks
Fuel bar = < 1 - Bar 1 & low fuel symbol both blinks Fuel bar
= 2 - Low fuel symbol glows steady
12. Speedometer : Vehicle speed will be displayed in digital form
in km/h.
13. Alarm / information messages will be displayed on Primary
speedometer in Dot Matrix format.