14
CHECKING THE OIL
Check engine oil each time prior to operating mini bike.
The oil level should be between upper and lower lines of oil gauge.
1. Set the Mini Bike on level ground, screw off the oil gage plug, wipe the oil
gage rod clean and then insert the gage plug into the crankcase again to
check the oil level. There is no need to screw the oil gage plug completely in
the hole to check the oil.
2. Add lubricating oil up to the edge of the fuel plug.
3. Screw oil gage plug tightly.
Lubricating Oil Recommended
The lubricating oil is an important factor affecting the performance and service life
of the engine. Please refer to the chart for the correct grade of engine oil based on
the environmental conditions in your area. Do not use any other type of oil other
than what is recommended in the chart. DO NOT MIX OIL WITH THE GASOLINE.
.45L (.40qt.) Oil
Lubricating oils of different
viscosity shall be employed
in different regions and at
different temperatures.
CAUTION
Never start the engine when there is insufficient lubricating
oil. Otherwise, it will cause harm to the engine.
Oil dip stick
MACHINE
OIL
TEMP.
°C
°F
-30
-22
40
104
-20
-4
-10
14
0
32
10
50
20
68
30
86
20W-40 20W-50
15W-40 15W-50
10W-40
10W-30
INSPECTION AND MAINTENANCE
Summary of Contents for DB30 Mini Bike
Page 9: ...3 1 4 2 5 1 2 3 4 5 LOCATION OF LABELS safety...
Page 10: ...SAFETY LOCATION OF LABELS 6 7 7 6 9 9 8 8...
Page 29: ...26 Engine Switch Transistor Magneto Ignition Coil Spark Plug B1 B1 ELECTRICAL SCHEMATIC...
Page 33: ...Baja INC P O Box 61150 Phoenix AZ 85082 Tel 602 443 9180 Toll Free 888 863 BAJA 2252...