Bajaj Auto Dominar 400, Owner'S Manual, Page: 15 / 40

Clock
Set Mode
• Digital clock indicates
time in HR & MM
separated by colon ‘:’
• It is 12 hour clock.
• Initially ‘:’ will be blinking
• Clock setting is possible
in TRIP 1 mode only.
CLOCK RESET
Auto exit without saving set value.
If engine/vehicle rpm is given then
system will exit from clock set
mode without saving set value.
Press set button for
less than 1 sec.
Set value will be saved
Exit clock setting mode
Digits stop blinking ‘:’ start blinking
Press mode push button
for less than 2 sec.
Press mode & set push
button together for more than
2 sec.
Press mode button for
less than 1 sec.
Press mode & set button
together for more than 2 sec.
Clock set mode is selected &
no editing is carried out for
more than 5 sec.
TRIP1 Mode selected
‘:’ stops blinking
Digits starts blinking
Hour digits will increase.
Minutes digits will increase.
1.
2.
3.
4.
5.
6.
11