Baja Outlaw 33 Owner'S Manual Download Page 10

Page: 10 / 86

viii

33 Outlaw

Information in this publication is based upon the latest product specifications available at printing. Baja

Marine Corporation reserves the right to make changes at any time, without notice, in the colors, equipment,

specifications, materials and prices of all models, or to discontinue models. Should changes in production models

be made, Baja

Marine is not obligated to make similar changes or modifications to models sold prior to the date

of such changes.

Owner’s Manual

33 Outlaw

Printed in the U.s.a. May 2006

MRP# 1813660

Baja Marine Corporation 2600 sea Ray Blvd., knoxville, Tn 37914

for information call 1-865-971-6270 or fax 1-865-971-6716

Internet address: http://www.bajamarine.com

Speed changes you.

TM.

Speed changes you.

TM.

Baja

, and

are registered trademarks of the Brunswick Corporation.

Speed changes you.

Summary of Contents for Outlaw 33























































































Search results

Summary of Contents for Outlaw 33

Reviews:

Baja Outlaw 33, Owner'S Manual, Page: 10 / 86

Search results

Summary of Contents for Outlaw 33

Reviews: