192 Islander
®
1.12
s
eCtIon
1 • s
aFety
f. G
rounDinG
In the event of running aground:
• Check for leaks. If water is coming in, stop the intake
of water before attempting to get the boat free.
• Inspect for damage to the hull, propulsion and
steering systems.
• Determine if the tide, wind and current will drive the
boat harder aground or will help to free it.
• Determine the water depth all around the boat,
and the type of bottom (sand, mud, rocks, etc.). If
it can be done without exposing persons to a risk
of injury, the boat should be moved away from
hard obstructions, and toward open water with soft
ground.
• Do not attempt to have your boat towed by other than
a trained and competent service, such as the Coast
guard or a salvage company. Recreational craft are
not designed to tow other recreational craft.
G. p
ropulsion
, c
onTrol
or
s
TeerinG
f
ailure
If the drive train fails, or the controls or steering do
not respond properly or at all:
• shut off engine.
• Put out the anchor to prevent drifting.
• Determine whether or not you can repair the problem
yourself. see the proper manuals for assistance
in troubleshooting the engine, steering and engine
controls.
• If you are not sure you can fix the problem, or if
conditions are adverse, signal for help.
16. s
afeTY
h
oTlines
The safety information in the preceding pages
gives only the general areas of concern for
boating safety. It is not intended to be, nor
can it be, exhaustive. You must take a boating
safety course, and get hands-on instruction in
the proper and safe operation of your boat from
experienced persons before cruising.
The U.s. Coast guard offers many pamphlets on
safety and other information not covered in this
manual. Contact your local Coast guard unit or call
the toll-free safety hotlines below for information.
• U.s. Coast guard 1-800-368-5647
• Canadian Coast guard 1-800-267-6687
In other countries, ask your marine dealer for
information on how to contact the national
boating law enforcement agency.
17. i
nTernaTional
r
equireMenTs
This vessel and its systems have been constructed
in accordance with standards and specifications in
effect at the time of manufacture as published by
the various regulatory authorities listed below.
1. Ministere De la Mer – France
2. Registro Italiano navale – Italy
3. Det norske Veritas – norway
4. securite des nauires – Canada
5. J.C.I. (Japan Craft Inspection) – Japan
6. n.k.k. (nippon kaiji kyokai) – Japan
7. B.s.I. (British standards Institute) – England
8. Ministerio Obras Publicas y Transporters – spain
9. EC Recreational Craft Directive – European
Community
Further information concerning these requirements
may be obtained from Baja
®
Marine Customer
service: 1-865-971-6270.
Summary of Contents for 192 Islander
