54
4. Remove oil filter cap
5. Remove oil filter
6. Clean oil strainer and oil filter with solvent.
7. Inspect rubber O-ring on the oil filter cap and replace if damaged.
8. Reinstall oil filter, O-ring and oil filter cover.
9. Reinstall oil strainer, spring and cap.
10. Torque drain plug to 18 ft.lbs. (24Nm) and reinstall oil filter cap.
11. Fill crankcase with specified oil. Refer to Pg.8 for correct oil.
WARNING
New and used oil could be hazardous.
Children and pets may be harmed by swallowing new or used oil.
Continuous contact with used oil can cause skin cancer in laboratory
animals. Brief contact with the used oil may irritate the skin.
Keep new and used oil away from children and pets. To minimize your
exposure to used oil, wear a long-sleeve shirt and moisture-proof gloves
(such as dish washing gloves) when changing oil. If oil contacts your
skin, wash thoroughly with soap and water. Launder any clothing or
rags if wet with oil. Recycle or properly dispose of used oil.
CAUTION
Failure to use the correct oil could harm your ATV.
Be sure to use the oil specified in the FUEL AND OIL section.
CAUTION
Running the engine without an adequate amount of engine oil could cause
severe engine damage.
Running the engine without any engine oil could cause engine overheating.
Always check the amount of engine oil before starting the engine.
Oil filter cap
Oil filter
Rubber O Ring
