background image

37

DIMENSIONS AND DRY MASS
Overall length............................................................1968mm (77.5 in)

Overall width.............................................................1295mm (51 in)

Overall height............................................................1194mm (47 in)

Dry weight .................................................................162.8Kg (359 lbs)

Weight capacity..........................................................163Kg (360 lbs)

ENGINE
Type.............................................................................Four stroke

Displacement..............................................................192cc

Horsepower.................................................................6.5 HP

Starting.........................................................................Recoil

Air cleaner....................................................................Foam

Approximate speed MPH..................................................25-30

Transmission.....................................................................Torque Converter

Spark plug type.................................................................MEIYA-F7RTC, NGK-BPR6ES

                                                                                            DENSO-W2OEPR,                    

                                                                                           CHAMPION-RN9YC, 

                                                                                           BOSCH-WR7DC

Spark plug gap.................................................................0.028 inches ~ 0.031 inches

FUEL

Main fuel tank capacity.....................................................30 oz.

BRAKES

Front brake type.................................................................None

Rear brake type..................................................................Hydraulic Disc

Operation ...........................................................................Left pedal

SUSPENSION

Front....................................................................................Single A-arm

Rear.....................................................................................Swing arm

Travel front.........................................................................101.6mm (4 in)

Travel rear...........................................................................76.2mm (3 in)

TIRES

Size Front...........................................................................19x7-8

Size Rear............................................................................19x9.5-8

SPECIFICATIONS

Summary of Contents for SD65 Go-kart













































Reviews: