Baja motorsports DB30 Mini Bike Service Bulletin Download Page 2

Page: 2 / 4

3. Remove carburetor bowl (D) by removing

bottom bolt (C)

5. Remove float swing pin (H) from bracket.

If needed, remove pin with a pair of needle

nose pliers.

4. Check movement of needle valve (J) when

float (I) is moved gently up and down. Needle

valve should move freely. If needle valve

sticks or stays in one position, the needle

valve will need to be cleaned by following the

remaining steps.

Summary of Contents for DB30 Mini Bike

Page 1: ...ck If gas is still leaking out of the carburetor after the above points have been checked it may be the float located inside the carbure tor is stuck causing gasoline to flow out the overflow gap Chec...

Page 2: ...t If needed remove pin with a pair of needle nose pliers H 4 Check movement of needle valve J when float I is moved gently up and down Needle valve should move freely If needle valve sticks or stays i...

Page 3: ...Carburetor If needle valve J is stuck spray carburetor cleaner on needle valve area and gently work loose 7 With carburetor bowl float and needle valve assembly removed spray carburetor cleaner up in...

Page 4: ...bly Clean parts with carburetor cleaner J L 9 Re assemble needle valve float assembly and install back in carburetor by following instructions in reverse order Make sure needle valve moves freely in a...