Baird JO32LEDBK, Operation Manual, Page: 19 / 26

1. Press the MENU button on the remote controller to
display the OSD main menu.
2. Press
t / u button to select the
LOCK
menu.
3. Press the OK button to enter the menu, then you can
use
p / q buttons to select the sub menu options.
4. Press t / u button to adjust.
5. Press the MENU or EXIT button to exit from the menu.
Lock Channel
:
Select the Lock Channel, then press OK button, you will be prompted to input the password if you
have already set your password. If not, enter the factory initial password “0000”. Press the
t or u
button to turn this function on or off.
Note
: If the Lock Channel is set to “On”, you will be prompted to input the password when you edit the
program or tune the programme or turn on the LED TV(The default password is 0000.)
Set Password
:
Use this option to change the password you use for the LOCK menu.
Please enter old password
Please enter new password
Confirm new password
1. Enter the password(The default password is 0000.)
2. Enter a new 4-digit number using the number buttons.
3. Enter the same 4-digit number to confirm.
Block Program
:
This option allows you to block some programmes. If you want to watch a blocked programme then
be prompted to input the password(The default password is 0000.) you will
Lock
Use p / q button to select your programme, press green button
on the remote control to lock or unlock the programme.
Parental Guidance( for DTV mode only)
:
Press
t
/
u
button to select the different age rating or select Off to ignore this function.
For example: the 18 age option, this rating is intended for viewers 18 years and older.
Select
DTV
DTV
DTV
C-02
LOCK MENU
Select OK
OK
OK
OK
NOTE
: If you change the password then remember to write it down
and keep it safe for future reference.”
OK