Bair Hugger 500/OR Service Manual
9
Control Board Fuse Replacement
6.
Remove the fuse and replace with a new one.
CAUTION: Replace only with the fuse capacity and type that is
indicated on the adjacent label.
7.
Reconnect the cable to the display board (ensure that the
mounting direction is correct).
8.
Place the top cover back into position.
9.
Replace the 8 Phillips-head screws around the cover.
10. Reconnect the warming unit to the power source.
11. Record the maintenance action taken and the hours of
operation (read from the hour meter) in the
Maintenance
Log (Appendix).
