3. Press the selector:
*Turning the time selector will illuminate the red light, if the light does not illuminate, your HomeSafe
may not be performing the disinfection process correctly. If the red light does not light up when
activated, please contact the service department.
* You can change the disinfection time by turning the selector.
* To change the default time, turn the selector switch to the desired time and hold it down until the
acoustic warning is heard
4. When the red light goes out, you can remove your objects.
*If the door is opened in the middle of a disinfection process, the lights will automatically turn off.
*Once the first 3-minute cycle is completed, it is recommended to turn the objects over and start a new
cycle to ensure proper disinfection.
5.
SETTING
UP
During the installation, respect the electrical installation regulations in force in the country
of use. HomeSafe is delivered fully assembled and operational, for the start-up you only
need:
●
Unpacking the product
●
Connect HomeSafe to a power outlet.
●
Turn on the appliance with the switch on the back.
6.
PRECAUTIONS
●
This device may be used by children aged 8 years and older and by persons
with reduced physical, sensory or mental capabilities or lack of experience or
knowledge, if they have been given appropriate supervision or training with
respect to the safe use of the device and understand the hazards involved.
Children should not play with the device. Cleaning and maintenance to be
carried out by the user must not be carried out by children without
supervision.
●
Do not bring any living creatures into the disinfection area.
●
Avoid touching the lamps directly with your hands.
●
If the power cable is damaged, it must be replaced by the manufacturer, its
after-sales service or similarly qualified personnel in order to avoid a hazard.
●
A disconnection system must be incorporated into the fixed wiring. For the
electrical connection, an isolator switch must be incorporated to ensure
all-pole disconnection, directly connected to the supply terminals and must
have contact separation on all poles, providing total disconnection under
Baintex 3-11 -2020
Summary of Contents for HomeSafe
Page 1: ...HomeSafe BOOK OF INSTRUCTIONS ...
Page 7: ...Baintex 3 11 2020 ...
