Bailey Infi 90 NTAM01, Instruction

Page: 11 / 29

INTRODUCTION
INSTRUCTION CONTENT
I-E96-406A 1 - 3
INSTRUCTION CONTENT
This manual has five sections and two appendices.
Introduction Is an overview of the features, description and specifications
and a description of the NTAM01 unit.
Installation Describes cautions to observe when handling the termination
unit. It shows the steps to install and connect the terminal wir-
ing before applying power.
Maintenance Provides a maintenance schedule.
Repair/Replacement
Procedures
Details how to replace a termination unit.
Support Services Describes the support services (repair parts, training, docu-
mentation, etc.) available from Bailey Controls Company.
Appendix A Shows the switch settings for the IMAMM03 Analog Master
Module.
Appendix B Shows the switch and jumper settings for the NDIS01 Digital
Indicator Station.
HOW TO USE THIS MANUAL
Read this manual before handling the termination unit. Refer
to the sections in this list as needed for more information.
1. Read Section 2 before connecting the NTAM01 unit.
2. Refer to Appendix A for the IMAMM03 master module.
3. Refer to Appendix B for the NDIS01 Digital Indicator Sta-
tion.
4. Refer to Section 3 for the maintenance schedule.
5. Refer to Section 4 and Section 5 when needed.
GLOSSARY OF TERMS AND ABBREVIATIONS
Table 1-1 contains the glossary of terms for this manual.
Table 1-1. Glossary of Terms and Abbreviations
Term Definition
Analog Continuously variable as opposed to discretely variable.
Cold Junction Refer-
ence The ambient temperature at the bimetallic junction at the termination point of thermo-
couple wires.