I-E96-416B
B - 1
APPENDIX B - IMASM01 ANALOG SLAVE MODULE
INTRODUCTION
The IMASM01 Analog Slave Module uses an NTAI05 unit for
termination. Dipshunts on the NTAI05 termination unit config-
ure the sixteen analog inputs for the IMASM01 slave. The
IMASM01 slave accepts inputs of four to 20 milliamps and one
to five VDC, zero to five VDC, zero to ten VDC, and -10 to +10
VDC.
This appendix contains figures and tables that show the
dipswitch location on the IMASM01 slave and its settings. This
information is provided as a quick reference guide for person-
nel installing the NTAI05 termination unit.
Figure
shows the termination unit dipshunt settings for
the IMASM01 slave. Table
lists the address switch settings.
Be sure to check the dipswitches before installing the
IMASM01 slave. Refer to the IMAMM03, IMASM01, IMASM02,
IMASM03 and IMASM04 instruction for more detailed informa-
tion to install and configure the IMASM01 slave.
Figure B-1. IMASM01 Slave Module
T00589A
SLAVE/GROUP
ADDRESS SWITCH
(INPUTS 1-8)
ENABLE/DISABLE
JUMPER
(INPUTS 1-8)
SLAVE/GROUP
ADDRESS SWITCH
(INPUTS 9-16)
ENABLE/DISABLE
JUMPER
(INPUTS 9-16)
P2
P3
P1
1
3
2
OPEN
1
3
2
OPEN
S1
S2
A
B
JP1
A
B
JP2
