Bailey Infi 90 NIRL03, Instruction

Page: 10 / 39

INTRODUCTION
INSTRUCTION CONTENT
1 - 2 I-E96-415A
®
INSTRUCTION CONTENT
This manual contains five sections and four appendices.
Introduction Contains an overview of the features, specifications and a
description of the IRL module.
Installation Describes precautions to observe when handling modules, and
setup procedures required before module operation. This sec-
tion also discusses jumper settings and installation
procedures.
Maintenance Provides a maintenance schedule.
Repair/Replacement
Procedures
Details how to replace an IRL module.
Support Services Describes the support services (spare parts, training, docu-
mentation, etc.) available from Bailey Controls Company.
Appendices A through D List the quick reference information necessary to configure
IMRIO02 modules and NDIS01, NDCS03 and IISAC01 stations.
HOW TO USE THIS MANUAL
Read this manual through in sequence. Read the installation
section thoroughly. Do the steps in order. Complete all steps in
the installation section before operating the IRL module. Refer
to the Table of Contents or Index to find specific information
after the module is operating.
REFERENCE DOCUMENTS
Table 1-1 lists the documents referenced in this instruction.
GLOSSARY OF TERMS AND ABBREVIATIONS
Table 1-2 lists definitions of the terms and abbreviations used
in this instruction.
Table 1-1. Reference Documents
Number Document
I-E93-902-1 NDCS03 Digital Control Station
I-E96-116 NDIS01 Digital Indicator Station
I-E96-117 IISAC01 Analog Control Station
I-E96-317 IMRIO02 Remote I/O Slave Module
I-E96-409 NICS01 Controller/Station Termination Module