INTRODUCTION
I-E96-410A
G - 1
APPENDIX G - IMFCS01 FREQUENCY COUNTER
SLAVE MODULE CONFIGURATION
INTRODUCTION
Figure
shows the location of the dipswitches used to con-
figure the IMFCS01 Frequency Counter Slave Module (FCS).
Table
gives the dipswitch settings to configure the module.
This information is provided as a quick reference guide for per-
sonnel installing the NIDI01 termination module. Configura-
tion consists of setting the slave expander bus address
(dipswitch S1). Refer to the
IMFCS01 Frequency Counter
Slave Module
instruction manual for detailed instructions.
Figure G-1. IMFCS01 Frequency Counter Slave Module
ADDRESS SELECT SWITCH
P1
P3
P2
T00523A
S1
1
OPEN
8
