IMDSM05 DIGITAL I/O SLAVE MODULE CONFIGURATION
INTRODUCTION
I-E96-410A
D - 3
Table D-4. IMDSM05 Switch S4 (Address Examples)
Address
Example
Switch Position
(Binary Value)
1
1
(128)
2
1
(64)
3
(32)
4
(16)
5
(8)
6
(4)
7
(2)
8
(1)
0
0
0
0
0
0
0
0
0
16
0
0
0
1
0
0
0
0
32
0
0
1
0
0
0
0
0
48
0
0
1
1
0
0
0
0
63
0
0
1
1
1
1
1
1
NOTES: 0 =CLOSED or ON, 1 = OPEN or OFF.
1.Switch positions 1 and 2 must remain CLOSED.
Table D-5. IMDSM05 Switch S5 (Address Switch)
Switch Position
Function
1
2
1
1
Enable contacts 1 - 4 of the address switch.
0
Disable contacts 1 - 4 of the address switch.
1
Enable contacts 5 - 8 of the address switch.
0
Disable contacts 5 - 8 of the address switch.
NOTE: 0 = CLOSED or ON, 1 = OPEN or OFF.
1.Switch position 2 must be set to a 1 for MFC and MFP modules.
Table D-6. IMDSM05 Jumpers J1 through J16
(Digital Input Type)
Jumper
Position
Function
1-2
Normal input or output.
2-3
Two wire isolated output.
Table D-7. IMDSM05 Jumpers J17 and J18
(Master Module Type)
Jumper
Jumper
Position
Function
J17
1-2
DSM module communicating to an
NLMM01 module.
J18
J17
2-3
DSM module communicating to an
IMLMM02, MFC or MFP module.
J18
