Bailey infi 90 NIDI01, Instructions Manual

Page: 17 / 49

INSTALLATION
SETUP/PHYSICAL INSTALLATION
I-E96-410A 2 - 3
Cable Connections
The NIDI01 Digital Input Termination Module terminates ana-
log and digital I/O signals, and interfaces them directly to a
master or slave module. Figure
2-2 shows the cable connection
from the termination module to the master or slave module.
Table
2-2 lists each cable and its applications.
Table 2-1. Jumper J1 through J10 Settings
Master/Slave
Module Type
Jumper Position
1 2 3 4 5 6 7 8 9 10
IMASO01 1 0 1 0 1 0 1 0 1 0
IMDSI02/IMDSO04 1 0 1 0 1 0 1 0 1 0
IMDSM04 0 0 0 0 0 0 0 0 0 1
IMDSM05 0 1 0 1 0 1 0 1 1 0
IMDSO01/02/03 0 0 0 0 0 0 0 0 1 0
IMFCS01 1 1 1 1 1 1 1 1 1 1
IMHSS02 1 1 1 1 1 1 1 1 1 0
IMLMM02 0 1 0 0 0 1 0 0 1 0
NOTE: 0 = open or cut jumper (cut jumpers at both ends to completely remove), 1 = intact or shorted jumper.
Figure 2-2. NIDI01 Cable Connections
T00515A
IMASO01
IMDSI02
IMDSM04/05
IMDSO01/02/03/04
IMFCS01
IMHSS02
IMLMM02
NIDI01
NKTM01
NKTU02/12
P3 P1