INSTALLATION
UNPACKING AND INSPECTION
2 - 2
I-E96-434A
®
UNPACKING AND INSPECTION
These are steps to follow for general handling:
1. Examine the module to make sure that no damage has
occurred in transit.
2. Notify the nearest Bailey Controls sales office of any damage.
3. File a claim for any damage with the shipping company
that handled the shipment.
4. Use the original packing material or container to store the
module.
5. Store the module in a place with clean air; free of extremes
of temperature and humidity.
SETUP/PHYSICAL INSTALLATION
This section explains how to configure and install the NIAI02.
The required procedures are installing the termination module
into the TMU, and connecting the field wiring and communica-
tion cables.
Cable Connections
Before installing the IMASM02, connect either the NKTM01 or
NKTU02/12 termination cable. Figure
shows the cabling
for the NIAI02 to the IMASM02 and NIAM02.
Install the termination module cable (NKTM01 or NKTU02/
NKTU12) to connect the TM to the slave. The NKTM01 is a flat
ribbon cable. The NKTU02 is a round, shielded cable with PVC
jacket. The NKTU12 is a round, shielded cable with non-PVC
jacket.
NIAI02 modules can be interconnected through ribbon cable
part number 6634408A2 supplied with the NIAI02. Up to eight
NIAI02 TMs can connect to a single master module through a
NIAM02 master termination module.
NOTE: The NIAM02 is used to connect NIAI02 TMs to the
IMAMM03 master for local cold junction compensation. The NIAI02
TMs for slaves 1 to 4 connect to J1 of NIAM02, and NIAI02 TMs for
slaves 5 to 8 connect to J2 of the NIAM02.
Cable Installation
The NKTU02/12 and NKTM01 cable connects the NIAI02 to the
IMASM02 slave module. The NIAM02 master termination mod-
ule connects to the NIAI02 through the 6634408A2 ribbon
cable. Table
lists the NIAI02 cable applications.
