Bailey infi 90 Modular Power System II, Instruction

Page: 36 / 54

INTRODUCTION
I-E96-427B A - 1
APPENDIX A - IMMFC03 MULTI-FUNCTION CONTROLLER
INTRODUCTION
Several dipswitches must be set for the IMMFC03 Multi-Func-
tion Controller Module. The IMMFC03 module consists of two
circuit boards: a memory board and a CPU board. The memory
board has no user configurable operating options. The CPU
board has three dipswitches that set the module operating
characteristics. Figure
A-1 shows the CPU board layout. Tables
A-1 , A-2 , A-3 , and A-4 explain the dipswitch settings for the
CPU board. For more information on the module, refer to the
IMMFC03 Multi-Function Controller Module product
instruction.
Figure A-1. IMMFC03 Module CPU Board Layout
Table A-1. IMMFC03 Dipswitch U72 Option Settings
Position Setting Function
1 0 Normal operation.
1 Enable special operations (refer to Table A-2).
2 0 Disable on-line configuration.
1 Enable on-line configuration.
3 0 Perform ROM checksum routine.
1 Inhibit ROM checksum routine.
4 0 Not used.
5 0 Perform ROM check.
1 Inhibit ROM (CPU board) check.
T00747A
P1
P2
P3
STOP SW2
STATUS
LED
CPU
LEDS
OPTION
SWITCH
BAUD RATE
SWITCH
JUMPERS
J1, J2, J3
LOOP ADDRESS
SWITCH
U72 U73 U75
RESET SW1
1 2 3 4
OPEN
5 6 7 8 1 2 3 4
OPEN
5 6 7 8 1 2 3 4
OPEN
5
J1 J2 J3