INTRODUCTION
NOMENCLATURE
1 - 6
WBPEEUI250016A1
®
NOMENCLATURE
lists the modules that make up the process control
unit interface and other associated equipment.
SPECIFICATIONS
Refer to Table
for the specifications of the modules making
up the process control unit interface.
Table 1-3. Nomenclature
Nomenclature
Description
IEMMU01/02/04
Module mounting unit
IEMMU11/12/21/22
Module mounting unit
INNIS01
INNPM11
Process control unit interface. Requires:
Network interface slave module
Network processing module
NFTP01
Field termination panel
NICL01
Communication termination module
NKLS01/11
Termination cable, INNIS01 to NTCL01
NKLS02/12
Termination cable, INNIS01 to NICL01
NKMP01/11
Redundancy cable, INNPM11 to INNPM11
NTCL01
Communication termination unit
NTMU01/02
Termination mounting unit
Table 1-4. Specifications
Property
Characteristic/Value
INNIS01
Memory
Power requirements
System capability
Communication rates
Mounting
208 kbytes RAM
64 kbytes ROM
+5 VDC at 900 mA; 4.50 W nominal
+15 VDC at 5 mA; 0.08 W nominal
-15 VDC at 200 mA; 3.00 W nominal
62,500 nodes in the system; 250 nodes on a loop. Any combination of PCU,
MCS, OIS or ICI interfaces.
10 Mbaud or 2 Mbaud
Occupies one slot in standard INFI 90 OPEN module mounting unit
INNPM11
Memory
Power requirements
Communication rates
Mounting
256 kbytes ROM
512 kbytes RAM
+5 VDC at 2 A; 10 W nominal
1 Mbaud (Controlway)
83.3 kbaud (module bus)
Occupies one slot in standard INFI 90 OPEN module mounting unit
