Bailey infi 90 IMHSS03, Instruction

Page: 86 / 93

INTRODUCTION
I-E96-322A D - 1
APPENDIX D - NIDI01 TERMINATION MODULE
INTRODUCTION
The IMHSS03 module can use an NIDI01 Digital I/O Termina-
tion Module to terminate its I/O connections. Full IMHSS03
functionality requires two NIDI01 modules with an NKAS02
termination cable. One NIDI01 module can terminate the
IMHSS03 module, but will only provide IMHSS02 functionality.
Jumpers on the termination module configure the I/O signals.
The IMHSS03 module has four analog inputs, nine analog out-
puts, three digital inputs and one digital output that terminate
at the NIDI01 termination module.
QUICK REFERENCE
Appendix D serves as a quick reference of NIDI01 I/O terminal
assignments, jumper settings, circuit board layout and cable
connections. Refer to the
Digital Input Termination Module
(NIDI01) instruction for more information.
Figure D-1 shows the NIDI01 circuit board layout and required
jumper settings. Figure D-2 shows the terminal assignments
and I/O signal polarity. Figure D-3 shows termination cable
connections.
Figure D-1. NIDI01 Circuit Board Layout
P1 CARD EDGE
CONNECTOR FOR
NKAS02 CABLE
TERMINAL 32
TERMINAL 1
TP25422B
NIDI01
P1
J1
J10