Bailey infi 90 IMHSS03, Instruction

Page: 15 / 93

INTRODUCTION
HOW TO USE THIS INSTRUCTION
1 - 4 I-E96-322A
®
HOW TO USE THIS INSTRUCTION
Read this instruction before handling the HSS module. Refer to
a specific section for information as needed.
1. Read Section 5 before installing the HSS module.
2. Do the steps in Section 3 .
3. Do the steps in Section 4 .
4. Refer to Section 6 to resolve problems if they occur.
5. Refer to Section 7 for scheduled maintenance require-
ments.
6. Refer to Section 8 to replace a part or find a part number.
7. Use Section 9 for information on ordering parts and war-
ranty information.
8. Refer to the appendices for a quick reference of HSS mod-
ule dipswitch and jumper settings, calibration and tuning
using function code 150, and termination unit/module jumper
and dipshunt settings, cable connections and terminal
assignments.
REFERENCE DOCUMENTS
Table 1-1 lists documents that provide reference material that
is useful to install, calibrate, tune and operate the IMHSS03
module.
Table 1-1. Reference Documents
Number Title
I-E96-200 Function Code Application Manual
I-E96-201 Multi-Function Processor Module (IMMFP01)
I-E96-202 Multi-Function Processor Module (IMMFP02)
I-E96-203 Multi-Function Processor Module (IMMFP03)
I-E96-314 Frequency Counter Module (IMFCS01)
I-E96-410 Digital Input Termination Module (NIDI01)
I-E96-424 Digital Input Termination Unit (NTDI01)
I-E96-445 Hydraulic Servo Termination Unit (NTHS03)
TP89-2 Analog Control Techniques and Tuning