Bailey Caravan, Owner'S Manual

Page: 95 / 127

4-52
4
Caravan Equipment
4.19.5 Opening the blinds
a) Move blind (end rod with rocker) right to the outside.
b) Hold the recessed grip with one hand; with the other hand, press the rocker and move the blind back
(do not let it recoil).
▲
Do not stand on the acrylic glass dome.
▲
Close Heki 2 completely before moving off.
▲
Do not leave your vehicle when Heki 2 is open.
▲
Please consult your local dealer if you have any problems or defects.
▲
Remove any snow/ice or dirt before opening the roof.
▲
Do not open when it rains or when there is a strong wind.
4.19.6 Care Instructions
Please clean the acrylic panes with the Seitz Acrylic Cleaner.
Stains and light scratches on the acrylic pane can be removed by using the Seitz Acrylic Polish and the
Seitz special polishing cloth.
Only use water and mild soap suds to clean the blinds.
The guarantee becomes null and void if these instructions are not followed.
4.20 SENATOR CASSETTE COMBINATION WINDOW BLINDS
Operating Instructions
In contrast to conventional double blinds, two different blinds are combined together into just one.
Plissé and insect-protection screen are to a certain extent “in circuit in series”. The pleated material can
be drawn down from above in stepless manner to the desired position. If, however, one wants to have
just the flyscreen function, the pleated material is first drawn right down. Then one uses the handle at
the top of the pleated material - this at the same time is the lower handle of the flyscreen.
This can also be set in stepless manner to the desired position. In this way one can let fresh air come
in while keeping insects out at the top and at the same time have good privacy and good protection
from insects at the bottom.
▲
The screens are controlled by tension springs. Do not let the screens ‘whiplash’ back into
the cassette. It is not advisable to keep the blinds closed when travelling for periods of 2
weeks or more.
4.20.1 Tensioning
The blind spring may be tensioned using a small screwdriver. Pull off the corner pieces and turn the
tension screw 1 or 2 times in a clockwise direction. Repeat if necessary but do not over tighten.
▲
Blinds may periodically require retentioning. It should be noted that this will be carried out
as a service item and is not covered under warranty.