Baileigh WP-1100, Operator'S Manual

Page: 8 / 28

6
6
ELECTRICAL SHOCK CAN KILL
The welding process uses and produces high voltages that can
severely injure or kill . Disconnect power source before performing
service or repairs. Insulate yourself from the piece part or other
components in the weld circuit.
ELECTRICAL AND MAGNETIC FIELDS
Electric current used with welding creates electric and magnetic fields
(EMF). These magnetic fields can have an effect on pacemakers and
other sensitive electronic equipment. If you wear a pacemaker or
similar device contact your doctor before operating this type of
equipment. Prolonged exposure to EMF may have other health effects
which are not yet known.
CUTTING SPARKS
A spark or piece of hot metal can fly out of the arc while welding.
Remove all flammable materials from the welding area. Wear
approved eye protection, and proper hand and body protection.
Make sure the cutting tip is not grounded when sitting idle, which
could cause heat buildup, resulting in a possible fire.
BEWARE OF PINCH POINTS
Keep hands and fingers clear of any gears or mechanisms.
KEEP CLEAR OF MOVING OBJECTS
Always be aware of the position of the clamp handle and the
counterweight. They are heavy and can swing back suddenly causing
serious body or head injuries.