Baileigh TN-200E, Operator'S Manual

Page: 11 / 28

9
9
TECHNICAL SPECIFICATIONS
Notching Stations 8
Notching Angle
90
º
, Fixed
Notching Capacity (Pipe, SCH 40)
1/4”, 3/8”, 1/2” (6.35mm, 9.5mm, 12.7mm)
3/4”, 1”, 1-1/4” (19.05mm, 25.4mm, 31.75mm)
1-
1/2”, 2” (38.1mm, 50.8mm)
Maximum Wall Thickness
0.133” (3.3mm)
Suitable Materials
Carbon Steels and Non-Ferrous Materials
(Aluminum, Copper, etc.)
Noise Emission without Load Below 55dB
Power Requirements 220V, 1Ph., 60Hz.
Recommended Circuit Size 20A
Motor Type Enclosed Fan Cooled, Induction, Capacitor Start
Motor 2HP (1.5 kW), 1ph, 220V, 60hz, 12A
Start Capacitor
200

F 250VAC
Run Capacitor 30

F 450VAC
On/Off Switch Magnetic
Power Cord 14AWG, 7-1/2 ft. (229cm)
Overload Protection 15A Circuit Breaker with Reset Button
Power Transfer Direct Drive to Gear Reducer to Eccentric Shaft
Oil Capacity 2.1qts (2.0L)
Operating Dimensions (L x W x H) 32.25
” x 15” x 14” (820 x 381 x 356mm)
Shipping Dimensions (L x W x H)
36” x 16” x 18” (914 x 406 x 457mm)
Net Weight 216lbs. (98kg)
Shipping Weight 247lbs. (112kg)
Based on a material tensile strength of *64000 PSI
– mild steel