37
37
SASH AND DOOR SHAPING
Shaping a door still requires two operations. Figure 33 shows
the sash cut for the first operation.
Figure 34 shows the stock flipped over and the sash cutter
used with a 1/4" groove cutter to complete the cut.
Figure 35 shows the first shaping cut with the sash cutter
for the matching door stile sash.
Figure 36 shows the same cut with the stock flipped.
Summary of Contents for SS-2421-V2
