Baileigh MD-3510, Operator'S Manual

Page: 18 / 32

16
16
INSTALLING CUTTERS
•
To insert a cutter, first insert the pilot pin, and then slide the cutter into the adaptor. Align the
proper flat with the locking screw and tighten securely with the supplied hex wrench.
•
Use the included allen wrench to tighten the 2 set screws to the flats on the shank of annular
cutter.
IMPORTANT: Ensure that the locking
screw is on a flat of the cutter and not just against the
rounded shank.
To remove cutter, reverse the procedure.
Ensure that the coolant feed tap is on and coolant
feeds properly by pushing the pilot pin. If it feeds too
quickly or slowly, adjust the tap accordingly. Keep the tap closed when not in use.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.