Baileigh IP-2008-HD, Operator'S Manual

Page: 18 / 64

15
15
Assembly Extension Table
Important: Use and assistant or a
lifting devise to lift and hold the table extension
in position during assembly.
1. Position the extension table up against the
main table and install the three hex head
bolts snug enough to hold the extension in
position.
2. Install the three leveling set screws finger
tight and then loosen 1/2 turn.
3. Place straight edge across the extension and the
main table.
4. Level the extension table to the main table. Use
the hex head bolts to align the table up and down
at the joint. Use the set screws to lift or lower the
outer end of the extension table.
5. When the extension is level, fully tighten the hex
head bolts.