Baileigh HSP-30A, Operator'S Manual

Page: 26 / 40

24
24
LUBRICATION AND MAINTENANCE
Note: Proper maintenance can increase the life expectancy of your machine.
Daily Maintenance
•
Check daily for any unsafe conditions and fix immediately.
•
Check that all nuts and bolts are properly tightened.
•
Lubricate threaded components pivot points and sliding devices.
•
Check hydraulic hoses and fittings for leakage.
•
Keep area around machine clear of debris.
•
Clean the outside of the press with a clean, soft, and dry cloth.
•
When not in use, keep the press dry and covered. Keep the ram and piston fully retracted to
prevent rust or corrosion.
•
If press efficiency drops, purge air from the hydraulic system. See Purging the Hydraulic
System.
DO NOT allow lubricant on the frame bed or the heel blocks. Wipe off immediately.
Checking the Hydraulic Oil
1. Remove the oil filler nut (32) on top of the reservoir.
2. If oil is low, refill with 22 ISO6743 hydraulic jack oil or equivalent.
3. Replace the oil fill nut (32).
4. Purge air from the hydraulic system.
32