Baileigh HSP-30A, Operator'S Manual

Page: 11 / 40

9
9
TECHNICAL SPECIFICATIONS
Maximum Capacity 30 ton (27 ton)
Hydraulic System Pressure 8485psi. (58.5MPa)
Moveable Cylinder Yes
Working Width 21.65
” (550mm)
Cylinder Stroke 5.9
” (150mm)
Cylinder Diameter
4.5” (114mm)
Piston Rod Diameter 2
” (50.8mm)
Piston Head Diameter 2.375
” (60.3mm)
Working Range
2” ~ 44.5” (51 ~ 1131mm)
Power Requirement Pneumatic/Manual
Air Fitting
¼”NPT
Air Pressure 107 ~ 124psi. (.75 ~ .85MPa)
Shipping Weight 450lbs (205kgs)
Shipping Dimensions 74
” x 31” x 12” (1880 x 787 x 305mm)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.