Baileigh DP-1000G, Operator'S Manual

Page: 17 / 48

14
14
Item Description Function
A Base Support the drill press
B Table Rotation Lock
Loosen to allow the table to rotate on its center axis.
NEVER OPERATE THE MACHINE WHEN
UNLOCKED
.
C Work Table Work surface with T-slots
D Chuck Holds various tools for drilling and tapping
E Drill Guard
Adjustable guard to cover the chuck and restrict
access during operation
F Depth Adjustment Moves the depth stop up and down
G Rotation Selector Switch
Selects if the chuck will rotate clockwise or counter-
clockwise.
DO NOT change rotation direction until
the spindle has stopped completely.
H Emergency Stop Button
Press to stop machine in the event of incorrect
operation or dangerous condition. Twist the
emergency stop button clockwise (cw) to reset.
I Stop Button Press to stop the motor
J Start Button Press to start the motor
K Speed (RPM) Selection Chart
Slows a visual representation of the handle positions
for each of the four RPM settings
L Speed (RPM) Selection Handles
Position the handles to match the chart diagram to
run the chuck at the RPM setting.
DO NOT change
spindle RPM until the spindle has stopped
completely.
M Drill Head Position Lock
Loosen to allow the drill head to move on the
column.
NEVER OPERATE THE MACHINE WHEN
UNLOCKED .
N Drill Head Adjustment Drive Raises and lower the drill head on the column
O Feed Handle Operator control to lower and raise the drill spindle
P Drill Head Gear Rack Engages the drill head for height adjustment
Q Power Cord
Connects to the proper power supply to provide
power to the machine
R Work Lamp Provides additional lighting to the work area
S Table Gear Rack Engages the table support arm for height adjustment
T Table Position Lock
Loosen to allow the table to move on the column.
NEVER OPERATE THE MACHINE WHEN
UNLOCKED
.
U Table Adjustment Drive Raises and lower the table on the column