Baileigh BG-379, Operator'S Manual

Page: 12 / 40

10
10
36.
Never position the work rest table at an acute angle between the top of the work rest table
and the moving belt or wheel. Doing so will create "nip point" that can cause serious injury
should an operator body part become entangled (pulled into) the nip point created by this
acute angle.
37. Correct equipment or safety problems immediately . Do not operate the equipment when
it requires maintenance, or correction.
38. Install and use high quality abrasive belts, wheels, discs, media, etc., as appropriate to
your machine. Understand and follow the operating requirements provided by the
manufacturer of these materials.
WARNING:
Certain alloys such as titanium may create conditions where
grinding debris can accumulate in a tight gap creating a potential fire hazard. When
in doubt consult with your safety officer. Failure to observe this warning may result
in the work piece or other item being caught in this gap, and/or being forcibly
ejected. Failure to heed this warning may cause serious bodily harm to the operator
and/or bystanders. NEVER USE THIS EQUIPMENT IF YOU ARE NOT PROPERLY
TRAINED IN ITS OPERATION and/or SAFE USE! IF IN DOUBT STOP and ASK FOR
GUIDANCE!