Baileigh B-CART-TB, Assembly And Parts Manual, Page: 11 / 24

11
Figure 4-25
6. Align the mounting holes on each Side Panel
flange with the mounting holes on each end of the
Base. Place the Casters (item #13) in the corners
of the Base as shown in Figure 4-26. Align the
Caster mounting holes with the mounting holes in
the Side Panel flange and Base. Attach Casters,
Base, and Side Panel using eight M8 x 25 Round-
Head Square-Neck Carriage Bolts (item #11) with
M8 Flanged Nylock Hex Nuts (item #2), as shown
in Figure 4-26. Attach the axle-end of the Base to
the Side Panel using four M8 x 20 Round-Head
Square-Neck Carriage Bolts (item #3) with M8
Flanged Nylock Hex Nuts (item #2).
Fully tighten
all nuts from steps 1 and 2, then fully tighten
all nuts from step 6.
Figure 4-26
7. Loosen the set screw (item #17) in the four Limit
Rings (item #16) (see Figure 4-27). Slide a Limit
Ring over each end of the Axle, followed by a
Wheel (item #15) and the remaining Limit Ring.
Snug the Limit Rings and Wheels to the Base.
Fully tighten the Limit Ring set screws to the
Axle.
Figure 4-27
8. Turn the cart assembly over to the upright position.
CAUTION: Cart is heavy. To avoid injury,
use two or more people to return cart to
upright position.
Set Screw Wheel
Limit Ring