background image

 

 

25. 

Do not remove

 any warning signs. 

26. 

DO NOT

 insert fingers or foreign objects into the intake or exhaust ports. Keep hair, loose 

clothing, fingers, and all body parts away from openings and moving parts of this machine. 

27. 

DO NOT

 use the filtration system without the filters in place and properly secured. 

28. 

PERIODICALLY INSPECT

 the filters for any cuts, rips or tears. 

NEVER

 operate this 

machine with damaged filters. 

29. This air filtration system is designed for home use or light commercial duty ONLY! 

 

IMPORTANT:

 Never operate the air filtration blower without the proper filters 

installed. 
 
 

TECHNICAL SPECIFICATIONS 

 

Motor 

3/4 HP (560w) 120V, 60Hz 

Power 

120V, 60Hz, 14.8A 

Motor Speed 

1350 RPM 

Suction Capacity 

2376 CFM 

Impeller Size 

11” x 7” (280 x 178mm) 

Switch 

Rocker, On/Off/RF 

Noise Level @ 3 Meters (9.8ft) 

70dB 

Overall Dimensions 

60.4

” x 24.8” x 21.8” (1535 x 630 x 555mm) 

Shipping Dimensions 

61.8

” x 26.1” x 23.4” (1570 x 665 x 595mm) 

N.W. 

126lbs (57Kgs) 

G.W. 

139lbs (63Kgs) 

 
 

TECHNICAL SUPPORT 

Our technical support department can be reached at 920.684.4990 and asking for the support 
desk for purchased machines. Tech Support handles questions on machine setup, schematics, 
warranty issues, and individual parts needs: (other than die sets and blades). 
For specific application needs or future machine purchases contact the Sales Department at: 
[email protected]Phone: 920.684.4990, or Fax: 920.684.3944. 

 

Note: The photos and illustrations used in this manual are representative only and 

may not depict the actual color, labeling or accessories and may be intended to illustrate 
technique only.

 

 

Note: The specifications and dimensions presented here are subject to change 

without prior notice due to improvements of our products.

 

Summary of Contents for AFS-2400

























Reviews: