Baileigh Industrial SR-5016E, Operator'S Manual

Page: 12 / 40

10
10
TRANSPORTING AND LIFTING
Follow these guidelines when lifting with truck or trolley:
•
The lift truck must be able to lift at least 1.5
– 2 times the machines gross weight.
•
Make sure the machine is balanced. While transporting, avoid rough or jerky motion, and
maintain a safe clearance zone around the transport area.
•
Use a fork lift with sufficient lifting capacity and forks that are long enough to reach the
complete width of the machine.
•
Remove the securing bolts that attach the machine
to the pallet.
•
Approaching the machine from the side, lift the
machine on the frame taking care that there are no
cables or pipes in the area of the forks.
•
Move the machine to the required position and
lower gently to the floor.
•
Level the machine so that all the supporting feet are
taking the weight of the machine and no rocking is
taking place.
Follow these guidelines when lifting crane or hoist:
•
Always lift and carry the machine with the lifting holes provided at the top of the
machine.
•
Use lift equipment such as straps, chains, capable of lifting 1.5 to 2 times
the weight of the machine.
•
Take proper precautions for handling and lifting.
•
Check if the load is properly balanced by lifting it an inch or two.
•
Lift the machine, avoiding sudden accelerations or quick changes of
direction.
•
Locate the machine where it is to be installed, and lower slowly until it
touches the floor.
NOTICE: Lifting and carrying operations should be carried out by skilled workers, such as a
truck operator, crane operator, etc. If a crane is used to lift the machine, attach the lifting
chain carefully, making sure the machine is well balanced.