Baileigh Industrial HSP-66M-HD, Operator'S Manual

Page: 35 / 48

32
32
LUBRICATION AND MAINTENANCE
Note: Proper maintenance can increase the life expectancy of your machine.
Daily Maintenance

Check daily for any unsafe conditions and fix immediately. In case of leakages, damaged
parts or bare electric cables; do not use the machine before it is repaired.

Check that all nuts and bolts are properly tightened.

Lubricate threaded components pivot points and sliding devices.

Check hydraulic hoses and fittings for leakage.

Keep area around machine clear of debris.

Clean the outside of the press with a clean, soft, and dry cloth.

When not in use, keep the press dry and covered. Keep the ram and piston fully retracted to
prevent rust or corrosion.

If press efficiency drops, purge air from the hydraulic system.
DO NOT allow lubricant on the frame bed or the heel blocks. Wipe off immediately.
Weekly Maintenance

On a weekly basis clean the machine and the area around it.

Apply rust inhibitive lubricant to all non-painted surfaces.

Check oil level of the hydraulic unit.

Check electrical connections.

Check lifting chains.
6 Month Maintenance

Inspect all hydraulic fittings and hoses and tighten any loose connections.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.