Baileigh Industrial HSP-110M-HD, Operator'S Manual

Page: 16 / 48

13
13
Anchoring the Machine

Once positioned, anchor the machine to the floor, as shown in the diagram, using bolts and
expansion plugs or sunken tie rods that connect through holes in the base of the stand.

Provide adequate clearance for the equipment in an environment that is clean, non-
flammable, non-corrosive, and dust free.
WARNING:
Before operating the press, make sure it is firmly anchored
the floor. If it tips over on you, it could cause severe injury or death.
40.00"
[1016.00]
40.00"
[1016.00]
40.0
0"
[1
016
.00
]
40.0
0"
[1
016
.00
]