Baileigh Industrial DP-1500VS, Operator'S Manual

Page: 13 / 64

10
10
TECHNICAL SPECIFICATIONS
Motor and Electricals:
Power Input Requirements 220V, 1Ph, 60hz
Motor Type TEFC Induction
Motor Power 2HP (1.5kw), 220V, 3ph, 60hz, 10A, 1720rpm
Inverter M-Type
Power Cable 14awg, 6 Ft
Power Plug Not included
Recommended Circuit and Fuse/Breaker Size 20A
Sound Emission Without Load 70db
Coolant Pump 1/8HP, 220V 1ph, 60hz, 0.5A
Capacities:
Drilling Capacity, Cast Iron 1
.5” (38.1mm)
Drilling Capacity, Mild Steel 1
.25” (31.75mm)
Tapping Capacity, Cast Iron .9375
” (23.8mm)
Tapping Capacity, Mild Steel
.75” (19.05mm)
Spindle to Table Maximum Distance 22.75" (578mm)
Spindle to Base Maximum Distance 40.75" (1035mm)
Spindle to Column Maximum Distance 10
.4375” (265.1mm)
Coolant Capacity 2.5 Gal. (9.5L)
Spindle:
Spindle Taper MT-4
Spindle Speed, Low Range Variable, 65
– 540 rpm
Spindle Speed, High Range Variable, 245
– 2000 rpm
Spindle Travel 5.9" (150mm)
Quill Feed (3 speeds)
0.0078"/rpm, 0.004 rpm, 0.002"/rpm
(0.198mm/rpm, 0.101mmrpm, 0.050mm/rpm)
Rotation Fwd/Rev (Rev = Tapping Only)
Table and Column:
Table Size 22
” x 18.75” (559 x 476mm)
Table Working Surface 18
.125” x 14.25” (460 x 375mm)
Table Travel:
Without Rack Adjustment 15
” (381mm)
Maximum Travel with Rack Adjustment 20
” (508mm)
T-Slot Number 2